Back to Previous

Additional Info

This telescope uses the same objective lens design as all Stellarvue ED telescopes.  The objective is a hand figured 80 mm clear aperture, 560 mm focal length (f/7)  air-spaced doublet lens. The extra low dispersion (ED) glass to reduce chromatic aberration or color fringing. Color correction and contrast is considerably better than an 80 mm f-7 doublet achromat. While no f-7 doublet can  give you the reflector like color correction of one of our apo triplets, this optic comes very close.

Fully multi-coated objective: The hand figured ED lens provides high  contrast with several extreme broadband  coatings used on all four lens. This boosts contrast: the stars appear vivid and the background, velvet black. These coatings  transmit light above and below the visual spectrum, which is important to  minimize reflections seen on ccd images.

Stardust White aluminum tube and dew shield: The tube, dew shield, and  fittings are precision machined. All  aluminum parts are black anodized with a polished, high gloss finish. The dew shield retracts  reducing the length of the telescope to only 17.5" when being stored and  extends to minimize dewing of the  objective at night. It can also serve as a glare shade during the day.

Internal tube treatment:  The inside of the tube  assembly is painted "ultra flat black" and is fully baffled to  eliminate reflection. The  focuser is ultra flat black inside to reduce draw tube reflections.

Stellarvue 2.5” dual speed, rack and pinion focuser: Designed especially for smoother imaging, our new precise, dual speed rack and pinion focusers now come standard on all Stellarvue telescopes. These are fully rotating using an over-sized rotation collar and thumb screw. Tension control thumb screw underneath holds tight and eliminates all side play. For visual users, these focusers are ultra smooth and free of vignetting. For imagers, our dedicated field flatteners thread directly into each focuser, maintaining precise alignment. This is far superior to 2” Crayford focusers that are not threaded for accessories.

Supplied accessories: The 80ED comes with a 2” focuser and 1.25” adapter and caps. To operate the telescope you will need a star diagonal or erecting prism, eyepiece(s) and a mount or tripod. The mount may require a rail or plate.

Light gathering and magnification power: The 80ED gathers 131 times the amount of light the naked eye can, revealing faint objects in space. Magnification power is dependent upon the eyepiece being used. Different eyepieces provide different magnification powers. Since our 80ED uses a highly accurate, hand figured objective lens that has been tested three times in the USA, these telescopes are free of coma and astigmatism seen in many import telescopes. This provides sharper details when viewing at higher powers. Dawes limit states that the maximum power for an 80 mm telescope under good conditions is about 186 power. Check the Recommended Accessories section to make the best choice for eyepieces.

Two year warranty and Stellarvue Service:  Stellarvue telescopes and accessories are covered by a two year warranty. But it  does not stop there. Since we are a telescope maker, we can repair your  telescope for a nominal fee years after it goes out of warranty, should you  accidentally drop it on concrete or otherwise damage it. Buy a Stellarvue  Telescope  with confidence. Our customer care is legendary.

Product Specifications

Objective Lens

80 mm clear aperture, 560 mm focal length, air spaced, doublet objective using extra low dispersion (ED) glass

Tube Assembly

All aluminum, fully baffled, precision machined optical tube assembly. Exterior painting is stardust white.

Dew shield

4 1/6" diameter fully retracting aluminum dew shield. Exterior painting is stardust white. Silk screened or laser engraved SV logo.


SV80ED-SFC1: Stellarvue 2” single speed, fully rotating Crayford focuser with compression ring and 1.25” compression ring adapter. Accepts SFF7-21 plug in field flattener.

SV80ED-25SV: Stellarvue SVF25 2.5" dual speed, precision rack and pinion focuser focuser with over-sized rotator, 2” and 1.25" compression ring adapters. Threaded to accept SFF7-25 and SFF3-25 dedicated field flatteners.

Mounting Ring(s)

Stellarvue’s Easy One Touch, cnc clamshell mounting ring with flat base. Has 1/4-20 threaded holes on bottom for mounting to a heavy duty camera tripod. If a mounting rail is needed, use the TP14 for mounts using a Vixen style rail and a TP6 for mounts requiring the Losmandy style rail.


3.5" diameter main tube and 4 1/16" diameter dew shield. OTA is 17 1/8" long and 19 3/4" with dew shield extended.


SV80ED-SFC1: only 4 lbs (light as a carbon fiber tube 80ed). 5.4 pounds with clamshell mounting ring and base.
SV80ED-25SV: 5.6 pounds. 7 pounds with clamshell mounting ring and base.


Optional, Recommended:
Red Dot Finder: F1001/F1001C
Multi Reticle Finder: F2/F2A
Optical Finder: F50M2/R50A



Light Gain


Color Correction 1-10


Contrast 1-10