1. 50 - 60 mm Low Profile Finder Scope Rings

with which to mount the finderscope on the SV clamshell. These are easily attainable from your local hardware store, however.

These look and feel very nice. They easily attach to my Orion dob reflector and do an admirable job of helping me adjust my Stellarvue finderscope so that it is properly aligned.

First, I want to say that Stellarvue has the best customer service that I have ever encountered, bar none, excellent. Secondly, the R050AT finder rings and mount are very well made and finished, and allow plenty of adjustment to align the finder scope with the telescope. Please note that if you will be using this mount on a larger diameter telescope tube, you will need to use shims between the mount and the telescope tube in order to avoid bending the mount when it is tightened down firmly. For my 6" telescope tube I used 3 thin flat washers on each of the two screws. My 10x50mm finder scope is also from Stellarvue, and also of exceptional quality. I highly recommend their products.