4. M002CW Complete Mount System - Wooden tripod

Product Description

The Denali tripod weighs about 16 pounds. It is made of States Industries ApplePly®, stainless steel, and anodized aluminum. Spring-loaded leg adjusters apply pressure with two knobs per leg. Simply loosen the knobs and extend the leg to the desired height. The tripod stands about 32" to 41", depending on how it is adjusted. Note that the column and M002C mount add about 13 1/2" to the center height. So, when the telescope is pointed horizontally, its center will be between 45.5" and 54.5" high.

New Stablelock Tray: 

Combining dense Appleply hardwood with a rock-solid design makes a big difference when comparing Stellarvue tripods to others. The newest tray attaches to the tripod securely with three knobs that have captive, threaded studs. Merely bring the tripod up from the bottom to attach the threaded studs to the precision machined tripod leg brackets. Thread each in place. Your tripod is now one solidly, bolted-together tripod that will hold Stellarvue telescopes up to the SVX127D using the Stellarvue M002C mount and column. We do not recommend this setup for larger telescopes. This tripod is sent fully assembled and tested. All you need to do is attach the tray, column and M002C mount head. 

New Carrying Bag

Store the tripod in the new, heavy-duty bag. The M002C mount head and column can be stored in a smaller separate bag supplied with this set. Place the tripod in the large bag with one leg facing up, then fit the mount/column bag in the case as shown. This will keep the parts together and allow you to carry everything except the tray out to the field.