Stellarvue Mounts

1. Stellarvue M002C Mount

M002C Mount - The Video! Click here for our video manual: Video Manual M002C Mount Operator's Manual - Click here for our online manual: M002C  Several years ago, we redesigned our M002 mount into a more advanced M002C mount. This newer...

2. Handle for Stellarvue Mounts - #MH

This long mount handle allows the user to move the telescope without putting pressure on the focuser when using a Stellarvue mount. The handle attaches to the dovetail shoe on any Stellarvue mount (except the M001V). Made to attach directly to the TDLV...

3. M002CS Complete Mount System - Stainless steel tripod

Get our best new M002C mount head with heavy duty column and a heavy-duty, stainless-steel tripod. This is the newest, ultra-smooth grab-and-go set-up for our 80 mm - 130 mm refractors. The heavy-duty stainless-steel tripod has an underside brace that...

Columns for M002 mounts

The M002 Mount need to be raised above a tripod top for it to work with various telescopes. Use a Stellarvue MEC column to accomplish this. Our columns are made of heavy duty 6061-t6 aluminum 2 3/4" in diameter and 11 1/4" long. They weigh 2.4 pounds and...

CW-1 Counterweight System

To get a better look at what's included, check out this customer's personal review of the CW-1.   This counterweight system is used to quickly adjust balance on smaller telescopes when eyepieces of different weights used. It eliminates the need to...

CW-1 Extra Weight

If you need an additional counterweight for your CW-1 weight system, this is it.  1. Counterweight shaft opening diameter: 0.63 Inches 2. Counterweight Diameter: 2.35 Inches 3. Counterweight Weight: 1 Pounds and 13 Ounces. 4. Counterweight Shaft...

Dovetail combination shoe - Losmandy and Vixen size

 This is a combination shoe that will hold either style mounting plate or rail. The wide jaw will hold the standard Losmandy style D rail and the narrower jaw holds the Vixen style rail. This newer version of the shoe has a set of heavy duty springs...

Losmandy Tripod Adapter for Stellarvue and Rowan Mounts

This adapter fits into the Losmandy Tripod or Losmandy Extension Tube with three included 3/8-16 screws. The adapter has a recess on top that the Stellarvue MEC or Rowan Rowan columns fit into. There is a large knob under the adapter with a threaded 12...

M002C Upgrade Kit

For customers who have an older version of the M002C mount, we have improved performance of the TDLV shoe by incorporating a custom machined guide pin with threaded attachment and higher tension springs. This improvement helps maintain better alignment...

MEC-TA

This adapter attaches to the top of the MEC column in place of the M002C mount. It provides a 3/8-16 male thread and may be used to hold other items atop the column such as a binocular parallelogram mount. See the example in one of the pictures above...

Replacement Base Adapters for M002 Mount Columns

If you purchase a tripod that uses an attachment bolt with a different thread size, you can replace the base adapters on most* of our columns.  MEC 003 Adapter: Use this adapter to mount your column to our Denali tripod or to any heavy-duty...